Electric Panel Upgrade Salem, OR

In order to mitigate potential risks, it is essential to handle electricity in accordance with industry standards and safety regulations. This is why our team of service professionals is dedicated to excellence and safety in every electrical service we provide. Our experienced, licensed experts have extensive knowledge in their field, so you can have peace of mind knowing you’ll receive top-quality service with a strong focus on safety, especially during an electric panel upgrade.

Salem, OR residents can rest easy knowing that we’ll begin by conducting a thorough electrical inspection of the meter box to identify any potential faults. Following that, we will assess the circuit breakers' capacity to handle potential overloads. Lastly, we will verify that the current levels are within safe parameters. Additionally, we will examine the condition of the electrical wires for any signs of wear and assess the energy efficiency of GFCI outlets.

Before moving forward with the initial service request, our skilled electricians pay utmost attention to these crucial steps in our replacement process. If your panel is currently outdated, specifically 20 years old or older, we highly advise considering an electrical panel upgrade in Salem, OR. It's also essential to assess whether a home rewiring service is necessary, as wiring typically lasts about 2 decades.

However, it's worth noting that rewiring is an intricate and expensive procedure when compared to a complete upgrade. Nevertheless, every homeowner must consider the significance of an electric panel update.

Salem, OR locals should know that during our efficient electrical panel upgrade process, our electricians upgrade the following:

• The circuit breaker box
• Panel electrical wiring
• Fuses

Through our in-home inspection and consultation service, our local experts will not only address your inquiries but also guide you through the next steps with precision and expertise. Rest assured that our professional electricians in Salem are committed to strictly adhering to safety protocols and procedures, ensuring the well-being of everyone involved. Should you require an electric panel upgrade, Salem, OR electricians will also take care of the permit application for you. Our efficient team of two will seamlessly handle the replacement, completing the job in approximately eight hours.

Maybe you already have an upgraded electrical panel, but unfortunately, damage or some issue has caused you to need an electric panel replacement; Salem, OR electricians will safely remove your existing panel and fully install your new one. While older electrical panels need to be upgraded, modern panels may just need replacement. Count on our team for expert electrical panel upgrades and replacements you can trust.

If your electrical panel is over ten years old, it's important to have our electricians perform a regular inspection to determine if a replacement is necessary. Look out for warning signs such as frequently tripped circuit breakers, unusual sounds, and scorching or burning smells. Should you notice any of these signs, do not hesitate to contact us, as you may require an urgent panel upgrade.

There are many reasons to upgrade your electrical panel. It isn't always because your panel is outdated or overloaded, as upgrading it offers a wide range of benefits. Some of the reasons why you should schedule an electrical panel upgrade include:

• Instead of breakers, older panels use outdated fuse panels that are less effective: The primary function of an electrical panel is to safeguard circuits from drawing more power than they can safely handle, ultimately preventing electrical fires. In the past, older panels used fuses to provide this protection, but newer panels, from the mid-1960s onward, used circuit breakers for a more advanced and reliable approach. If you have an older fuse panel, for improved safety and functionality, it's advisable to consider an electric panel upgrade in Salem, OR.

• Many panels are not adequately sized to meet the demands of modern life: The electrical panel is the crucial component that regulates the amount of electricity available in your home at any given time, typically measured in amperes (amps). Older fuse-based panels usually provide either 30 or 60 amps, while older circuit breaker panels commonly offer 100 amps. However, the current standard for accommodating modern lifestyles and new homes is 200 amps or higher. If your home has 100 amps or less, it may be worth considering an electric panel upgrade, Salem, OR homeowners.

• Aging panels often exhibit clear signs of being inadequate for the task: To ensure the safety and effectiveness of your electrical panel, the most reliable course of action is to seek assistance from our Salem professional electricians. They possess the expertise to assess the electrical demands of your modern appliances and light fixtures, thereby determining if your current panel adequately meets these requirements. However, several indications suggest that upgrading your panel is a wise decision. These include flickering lights, corroded breaker switches, crackling sounds emanating from the panel, a warm panel, and frequent power surges. By arranging for an inspection and potential upgrade of your panel, you will be taking proactive steps to safeguard your home's electrical system.

• Electricity demands have outgrown the capabilities of older panels: Salemites are embracing the benefits of going electric. A fantastic initiative is underway to replace inefficient oil- or gas-fired furnaces and gasoline-powered cars with cleaner, more efficient electric alternatives, such as heat pumps and electric vehicles (EVs). However, this transition to electrification comes with increased power demand, potentially exceeding the electrical capacity of older homes. Therefore, many individuals will need to consider an electrical panel upgrade to at least a 200-amp service.

If your monthly utility bill is higher than expected and your electricity usage doesn't account for it, there may be a problem with grounding or bonding in your system. While a Salem electrical panel upgrade can help with panel heat, other components may require repair or replacement. A local electrician can conduct an inspection, identify the issues, and offer solutions to reduce energy waste. Moreover, consider installing high-efficiency electric appliances to reduce costs further, as older models lose efficiency over time. Upgrading to Energy Star-certified appliances can lead to substantial savings on your utility bill.

Upgrading a panel and rewiring a house are two distinct tasks, with the latter being a more extensive undertaking. When it comes to installing a new panel, the existing wiring in most homes is generally in good condition and does not require replacement. However, replacing the panel is often a crucial component of rewiring a house to meet modern standards.

For an electric panel upgrade, Salem, OR homeowners can always rely on our electricians to provide quality service at an affordable price. Upgrading your electric panel is a smart investment in the safety and efficiency of your home's electrical system. Our experienced electricians are committed to delivering exceptional service and ensuring your home's electrical needs are met with the highest standards of quality and safety. Home or business, Mr. Electric of Salem is here to help ensure your electrical system meets all your future and current electrical needs.

Contact our excellent customer service team to schedule an appointment at a time that works best for you.

Mr. Electric of Salem proudly serves nearby zip codes, including Albany, Dundee, Four Corners, Hayesville, Keizer, Newberg, Wilsonville, and Woodburn.